The PAG L95e (Model 9310A) is a 14.8V 6.5Ah battery that has a maximum continuous output current rated at 7 amps. It has been designed as a high-quality, low-cost replacement for the Anton-Bauer Dionic 90, and is directly compatible with cameras that incorporate the Anton-Bauer battery mount. The significant advantage of the new PAG L95e is that it can be charged using existing stocks of Anton-Bauer Li-Ion compatible chargers. There is no need to replace chargers or purchase additional charge adaptors, enabling the switching of battery systems to be simple and economic.

The L95e has a better quality to price ratio than any other battery in this market. Premier-quality materials and branded Li-Ion cells are used in its construction. It features a comprehensive electronic protection circuit which is itself protected from the results of damage to the cell pack. PAG asserts that no other manufacturer protects its Li-Ion batteries as thoroughly and guarantees the battery for 18 months.

The battery’s capacity indicator displays charge status in terms of percentage using five LEDs. Each LED represents approximately 20% of available capacity. When the battery is on-load the display will also provide an estimate of remaining camera run-time. It uses the five LEDs to indicate the remaining hours and minutes. Battery data such as serial number, date of manufacture, number of cycles and temperature can be displayed on the screen of the Anton-Bauer charger (2000 series).

There is no restriction on the number of PAG L95e batteries that can be transported by air in hand luggage, because its capacity is below 100 watt-hours.

The L95e has a self-recovery feature that enables it to be reset after the protection circuit has been tripped, by simply pressing the display button. No ‘sleep mode’ is required since the display does not discharge the battery between periods of use.

The PAG L95e is also available in V-Mount and PAGlok formats.

• 14.8V 6.5Ah 95Wh, Li-Ion
• Snap-on Compatible
• 5 LED Run-Time and Capacity Indicator
• Battery data displayed on Anton-Bauer charger
• Indicates run-time on-load
• Charges on all-chemistry PAG chargers (chip-upgrade required) and Anton-Bauer Li-Ion chargers
• More safety features than other Li-Ions
• Electronic protection system
• Circuit protected against damage
• 18 month warranty
• Dimensions:
  130 x 86 x 52 mm
• Weight:
  760g

Please note, this battery should not be charged on older non Li-Ion Anton-Bauer chargers