The Panasonic AG-BS300 base station connects with the AG-CA300G camera adapter with two BNC cables allowing transmission of HD digital images, return images, tally signals, mic signals and genlock signals.

The base station also comes with a power cable that runs along the BNC cables to supply remote power to the camcorders. The AG-BS300 features two HD/SD SDI outputs and a composite video output.

Cables for the base station are available in two lengths: 100M and 50M.

Users can remotely shade or paint the camcorder from the control room.

Camera Studio System - Base Station

• Digital signal transmission ensures high-quality, degradation-free images.
• The base station and camera adaptor can be separated up to a distance of 328' (100 meters).
• Connection with two BNC cables allows transmission of HD digital images, return images, tally signals, mic signals, and genlock signals.
• Connection of the AG-EC4G Extension Control Unit or AJ-RC10G Remote Control Unit (*1) enables camera-recorder control.
• Up to 70 watts of power can be supplied to the camera-recorder (*2) and a compact monitor and servo zoom can also be driven.
• AG-BS300: Supports both AC (100 to 240 V) and DC (12V) power supplies. Includes two SDI (HD/SD) outputs and a composite video output.

*1: The AJ-RC10G can control only the functions that are supported by the camera-recorder. It cannot operate unsupported switches or dials.
*2: Power can be supplied only when the AG-BS300 Base Station is driven by an AC power source. A separate power cable is also required between the AG-BS300 Base Station and the AG-CA300G Camera Adaptor. Other manufacture's power cables which Panasonic verifies are recommended to use.