The NTG-2 provides a balanced low impedance output stage and operates either from an internal 1.5 V battery (AA) or 48 V to the P48 standard. A wide bandwidth and controlled polar response coupled with low noise SMT electronics, makes the NTG-2 the perfect choice for film, video engineering and voice-over work.

The NTG-2 is extremely lightweight making it ideal for mounting directly to video cameras or on boom poles.

•Broadcast sound quality
•Low noise circuitry
•Condenser transducer
•P48 phantom power or 1.5V AA battery
•Two step High-Pass Filter - Flat or 80Hz
•Rugged metal construction
•Low weight - 161g (5.17 oz.)
•Low handling noise

• Power
  P48 (48V) phantom supply or 1.5V AA battery
• Acoustic Principle
  Line gradient
• Directional Pattern
  Super Cardioid
• Frequency range
  20Hz-20kHz, selectable HPF @ 80Hz/12dB/octave
• Output impedance
  250Ω (phantom), 350Ω (battery)
• Signal noise ratio
  76 dB SPL (A - weighted per IEC651)
• Equivalent noise
  18 dB SPL (A - weighted per IEC651)
• Maximum SPL
  131dB SPL (@ 1kHz, 1% THD into 1KO load)
• Maximum output voltage
  -15.4dBu (@ 1kHz, 1% THD into 1KO load)
• Sensitivity
  -36 dB re 1 Volt/Pascal (15 mV @ 94 dB SPL) +/- 2 dB @ 1kHz
• Weight
  161gm
• Dimensions
  278 x 22 x 22mm (HxWxD)
  
  
• Included Accessories
  ZP2 zip pouch
  RM5 stand mount
  WSVM windshield