b>Sennheiser K6 - power module
The K6 powering module is the heart of the Sennheiser professional modular microphone system and can be powered either by its internal ‘AA’ size 1.5 V battery or by 12 - 48 V phantom power. The K6 can be combined with different condenser microphone heads to provide a wide variety of polar patterns.

Switchable bass roll-off filter protects against rumble, handling, pop and wind noise
On/off switch with battery test
High output, low noise
Transformerless balanced output on 3-pin XLR connector

Package contains
- 1 x K6 powering module
- 1 x MZQ 200 microphone clamp
- 1 x AA battery
- 1 x Protective carrying case

Sennheiser ME66 - short gun microphone
The ME 66 is a short gun microphone head designed for use with the K6 and K6P powering modules. It is especially suitable for reporting, film and broadcast location applications and for picking up quiet signals in noisy or acoustically live environments as it discriminates against sound not emanating from the main pick-up
direction.

- Super-cardioid/lobar pick-up pattern
- Highly directional
- Low inherent self-noise
- High sensitivity
- Wide frequency response

Package contains
1 x ME 66 short gun microphone

Both parts have a matt black, anodised, scratch-resistant finish.

K6 Powering Module

• Frequency response:
  30 – 20,000 Hz - 1 dB
• Transmission factor (1 kHz):
  0 dB
• Nominal impedance:
  200 Ω
• Min. terminating impedance:
  1 kΩ
• Max. output voltage:
  2 V (at 1 kHz)
• Power supply:
  phantom 12 - 48 V (± 4 V) or 1.5 V AA size battery
• Supply current:
  2.2 mA
• Battery life:
  approx. 150 hrs
• Dimensions:
  155 x Ø 22 mm
• Resultant length*:
  94 mm
• Weight:
  approx. 45 g

ME66 Microphone Module

• Transducer principle (Microphone)
  pre-polarised condenser microphone
• Pick-up pattern
  super-cardioid/lobar
• Frequency response (microphone)
  40.....20000 Hz +- 2,5 dB
• Sensitivity in free field, no load (1kHz)
  50 mV/Pa +- 2,5 dB
• Nominal impedance
  200 Ohm (K6)
• Min. terminating impedance
  1000 Ohm ( K6)
• Equivalent noise level
  10 dB
• Equivalent noise level weighted as per CCIR 468-3
  21 dB
• Maximum sound pressure level (passive)
  125 dB / 1 kHz (K = 1%)
• Dimensions
  22.5 x 22.5 x 221 mm