LED Accessories Products

Online Shop › Portable Production Equipment › Portable Lighting › Led Lighting › Led Accessories

 
Sort by:
 
X3-BD Barndoor option for X5-Lite
X3-BD Barndoor option for X5-Lite
Barn door attachment for IDX X5-Lite, with two barn doors and three filter holders
More info >>
£59.00 (ex VAT)
IDX Power
 
X3-P2 Replacement base with D-Tap connector
X3-P2 Replacement base with D-Tap connector
IDX X3-P2 Replacement base for X3-Lite & X5-Lite w/ D-Tap connector
More info >>
£40.00 (ex VAT)
IDX Power
 
X3-PC Replacement base with XLR connector
X3-PC Replacement base with XLR connector
IDX X3-PC Replacement base for X3-Lite & X5-Lite w/ XLR connector
More info >>
£40.00 (ex VAT)
IDX Power
 
'Y' Splitter Cable for LitePad
'Y' Splitter Cable for LitePad
'Y' Splitter Cable for Rosco LitePads, to enable two luminairs to be run from one power supply
More info >>
£14.00 (ex VAT)
Rosco
 
152mm Mounting Bracket for LitePad
152mm Mounting Bracket for LitePad
Rosco mounting bracket for 152mm (6") LitePad LED units enables the luminair to be free-standing or with the 1/4 inch bolt on the back can be attached to stands, etc.
More info >>
£24.00 (ex VAT)
Rosco
 
3 and 5 Amp 240v Transformers
3 and 5 Amp 240v Transformers
Rosco 3 and 5 amp 240 volts AC to 12 volts DC transformers for LitePads
More info >>
£14.00 (ex VAT)
Rosco
 
305mm Mounting Bracket for LitePad
305mm Mounting Bracket for LitePad
Rosco mounting bracket for 305mm (12 inch) LitePad LED units enables the luminair to be free-standing or with the 1/4 inch bolt on the back can be attached to stands, etc.
More info >>
£30.00 (ex VAT)
Rosco
 
3m Extension Cable for LitePad
3m Extension Cable for LitePad
Rosco 3m Extension Cable for LitePad
More info >>
£11.00 (ex VAT)
Rosco
 
4-Pin XLR Adaptor for LitePad
4-Pin XLR Adaptor for LitePad
A 4-pin XLR adaptor cable enabling LitePads to plug into any battery belts or camera batterys with a standard XLR4 socket.
More info >>
£17.50 (ex VAT)
Rosco
 
4-Way Spider Cable for LitePad
4-Way Spider Cable for LitePad
4 way spider cable to allow up to 4 Rosco LitePads to be run from one PSU
More info >>
£17.00 (ex VAT)
Rosco
 
610mm (24”) Mounting Bracket for LitePad
610mm (24”) Mounting Bracket for LitePad
Rosco mounting bracket for 610mm (24 inch) LitePad LED units enables the luminair to be free-standing or with the 1/4 inch bolt on the back can be attached to stands, etc.
More info >>
£54.00 (ex VAT)
Rosco
 
76mm Mounting Bracket for LitePad
76mm Mounting Bracket for LitePad
Rosco mounting bracket for 76mm LitePad LED units enables the luminair to be free-standing or with the 1/4 inch bolt on the back can be attached to stands, etc.
More info >>
£18.00 (ex VAT)
Rosco
 
Anton Bauer Adaptor for LitePad
Anton Bauer Adaptor for LitePad
The Rosco adaptor cable, allows LitePads to be powered from or camera batterys with a standard XLR4 socket.
More info >>
£29.00 (ex VAT)
Rosco
 
Car Adaptor for LitePad
Car Adaptor for LitePad
Rosco Car Adaptor enables a LitePad to be powered for a car's cigarette lighter/accessory socket
More info >>
£17.50 (ex VAT)
Rosco
 
Eggcrate for LitePad 152mm x 152mm
Eggcrate for LitePad 152mm x 152mm
Rosco Eggcrate for LitePad LED panel snaps onto the front of a 152 x 152mm (6 x6 inch) luminaire and narrows the spread of light from the fixture. It reduces the standard beam spread of 165° to 120°
More info >>
£12.00 (ex VAT)
Rosco
 
Eggcrate for LitePad 152mm x 305mm
Eggcrate for LitePad 152mm x 305mm
Rosco Eggcrate for LitePad LED panel snaps onto the front of a 152 x 305 mm (6 x12 inch) luminaire and narrows the spread of light from the fixture. It reduces the standard beam spread of 165° to 120°
More info >>
£14.00 (ex VAT)
Rosco
 
Eggcrate for LitePad 305mm x 305mm
Eggcrate for LitePad 305mm x 305mm
Rosco Eggcrate for LitePad LED panel snaps onto the front of a 305 x 305mm (12x12 inch) luminaire and narrows the spread of light from the fixture. It reduces the standard beam spread of 165° to 120°
More info >>
£29.00 (ex VAT)
Rosco
 
Eggcrate for LitePad 610mm x 610mm
Eggcrate for LitePad 610mm x 610mm
Rosco Eggcrate for LitePad LED panel snaps onto the front of a 610 x 610mm (24x24 inch) luminaire and narrows the spread of light from the fixture. It reduces the standard beam spread of 165° to 120°
More info >>
£34.00 (ex VAT)
Rosco
 
Eggcrate for LitePad 76mm x 152mm
Eggcrate for LitePad 76mm x 152mm
Rosco Eggcrate for LitePad LED panel snaps onto the front of a 76 x 152 mm (3 x 6 inch) luminaire and narrows the spread of light from the fixture. It reduces the standard beam spread of 165° to 120°
More info >>
£11.00 (ex VAT)
Rosco
 
Eggcrate for LitePad 76mm x 305mm
Eggcrate for LitePad 76mm x 305mm
Rosco Eggcrate for LitePad LED panel snaps onto the front of a 76 x 305mm (3 x 12 inch) luminaire and narrows the spread of light from the fixture. It reduces the standard beam spread of 165° to 120°
More info >>
£12.00 (ex VAT)
Rosco
 
LitePad 2 Channel DMX Dimmer
LitePad 2 Channel DMX Dimmer
Rosco 2 channel addressable DMX dimmer for LitePads, to enable either local or remote control of single or groups of luminairs
More info >>
£191.00 (ex VAT)
Rosco
 
LitePad AA Battery Holder
LitePad AA Battery Holder
Rosco LitePad AA battery holder, with space for 8 x AA batteries, it will power 1 x 152 x 152mm LitePad for approximately 4-5 hours
More info >>
£14.00 (ex VAT)
Rosco
 
LitePad Axiom 1/4 - 20 Baby (5/8) Pin
LitePad Axiom 1/4 - 20 Baby (5/8) Pin
Rosco LitePad Axiom 1/4 - 20 Baby (5/8) Pin enabling the LitePad Axiom's 1/4-20 mounting brackets to be attached to any Baby Pin (5/8th) socket (ie. C-Stand)
More info >>
£4.40 (ex VAT)
Rosco
 
LitePad Axiom 1/4 - 20 Bracket
LitePad Axiom 1/4 - 20 Bracket
This LitePad Axiom mounting bracket has a 1/4 - 20 bolt which enables the LitePad Axiom to be attached to any device with a 1/4 - 20 female threaded socket
More info >>
£11.00 (ex VAT)
Rosco
 
LitePad Axiom 5/8th Receiver Bracket
LitePad Axiom 5/8th Receiver Bracket
This LitePad Axiom mounting bracket has a 5/8th Pin (Baby Pin) which allows LitePad to be attached to any device with a 5/8th (Baby) male pin, such as a gaffa clamp
More info >>
£30.00 (ex VAT)
Rosco
 
LitePad Axiom Baby Pin Bracket
LitePad Axiom Baby Pin Bracket
This LitePad Axiom mounting bracket has a Baby Pin (5/8th Pin) which allows LitePad to be attached to any device with a Baby Pin female socket
More info >>
£14.50 (ex VAT)
Rosco
 
LitePad Axiom Battery Holder Bracket
LitePad Axiom Battery Holder Bracket
This bracket from Rosco, enables the LitePad AA Battery Holder to be attached directly to any of the LitePad Axiom mounting brackets
More info >>
£11.00 (ex VAT)
Rosco
 
LitePad Axiom Wall Plate Bracket
LitePad Axiom Wall Plate Bracket
This LitePad Axiom mounting bracket has a wall plate which allows the LitePad to be attached or screwed onto almost any surface
More info >>
£27.00 (ex VAT)
Rosco
 
LitePad Cold Shoe Attachment
LitePad Cold Shoe Attachment
An attachment that allows a LightPad or LitePad Axiom to be the cold shoe of almost any still photography camera
More info >>
£8.80 (ex VAT)
Rosco
 
LitePad Lighting Stand
LitePad Lighting Stand
Compact, lightweight stand for Rosco LitePad & LitePad Axiom up to 12 x 12 inches, with the addition of a suitable mounting adaptor
More info >>
£48.00 (ex VAT)
Rosco
 
LitePad Loop 101 mm (4 inch) L-Bracket Kit
LitePad Loop 101 mm (4 inch) L-Bracket Kit
The 101 mm (4 inch) L-Bracket positions the LitePad Loop further away from the camera than the standard 50mm (2 inch) L-Bracket does, thus allowing longer lenses to be used
More info >>
£21.00 (ex VAT)
Rosco
 
LitePad Loop Anton/Bauer Bracket c/w Cheeseplate
LitePad Loop Anton/Bauer Bracket c/w Cheeseplate
The Rosco LitePad Loop Anton/Bauer Bracket accessory allows for the attachment of any Anton/Bauer battery (sold separately) to the bottom of the LitePad Loop Mounting Assembly
More info >>
£162.00 (ex VAT)
Rosco
 
LitePad Loop Colour Filter Pack
LitePad Loop Colour Filter Pack
Rosco LitePad Loop Colour Filter Pack is designed to fit on the LitePad Loop. The Colour Filter Pack includes filters for warming the colour temperature (CTO Filters), Minusgreen, and Cosmetic filters, perfect for enhancing flesh tones
More info >>
£35.00 (ex VAT)
Rosco
 
LitePad Loop Light Masks
LitePad Loop Light Masks
Rosco LitePad Loop Light Masks offer a creative solution for altering the shape of the light as seen in a person's eye. Eye lights are an important part of any close up shot, and the Light Masks give you a great way to make them unique
More info >>
£35.00 (ex VAT)
Rosco
 
LitePad Loop Light Stand Plate
LitePad Loop Light Stand Plate
The LitePad Loop Light Stand Plate accessory enables the LitePad Loop to be attached to a LitePad Swivel Arm and then to a LitePad light stand
More info >>
£7.00 (ex VAT)
Rosco
 
LitePad Loop V-Mount Bracket c/w Cheeseplate
LitePad Loop V-Mount Bracket c/w Cheeseplate
Rosco LitePad Loop V-Mount Bracket battery accessory allows for the attachment of any V-Mount style battery (sold separately) to the bottom of the LitePad Loop
More info >>
£179.00 (ex VAT)
Rosco
 
LitePad Single Fader Dimmer
LitePad Single Fader Dimmer
Rosco single fader in-line LitePad dimmer
More info >>
£80.00 (ex VAT)
Rosco
 
LitePad Snake Arm
LitePad Snake Arm
Rosco LitePad Snake Arm, a 7 inch bendable arm capable of positioning any of the smaller size LitePads or LitePad Axioms, with the addition of a suitable mounting adaptor
More info >>
£22.00 (ex VAT)
Rosco
 
LitePad Swivel Arm
LitePad Swivel Arm
Rosco LitePad Swivel Arm, a ball and socket arm that allows for positioning of all LitePads & LitePad Axioms except the 24 x 24 inch model
More info >>
£25.00 (ex VAT)
Rosco
 
Right Angle 3 metre Extension Cable for Axiom
Right Angle 3 metre Extension Cable for Axiom
A 3 metre right angled extension cable designed for use with Rosco's LitePad Axiom, to enable it to be placed further away from the transformer
More info >>
£11.00 (ex VAT)
Rosco