The Rosco Litepad HO+ Everywhere Lighting Kit is the only LitePad kit that contains both Daylight and Tungsten LitePad HO+ units with colour temperatures of both 5800° and 3600° Kelvin.

The kit includes 6 x LitePad HO+ Daylight (5800k) and 6 x LitePad HO+ Tungsten (3600k) with transformer power supplies. It has extensions, splitters and battery cables, mounting brackets, a single fader dimmer & a Cinegel swatchbook and is contained in a strong, waterproof Pelican Case with wheels and a handle. Six three amp transformers are included to use this kit with 240 AC voltage.

The LitePad HO+ is a slim profile, edge-lit LED light source. At only 8mm thick, the LitePad HO+ is able to fit in places where conventional light sources will not. Rosco's LitePad HO+ is available in eight standard sizes, 6 of which are in this kit.

Slim Profile
LitePad is only 8mm thick, making it one of the thinnest light fixtures in the world. Its slim profile allows the LitePad to be placed and even hidden in places conventional light fixture would not fit. No thicker than a pad of paper, LitePads can easily fit into a back pack or messenger bag for easy transportation.

Soft Quality of Light
One of LitePad's most important attributes is the quality of light it produces. LitePad outputs a soft, even beam of light perfect for filling in shadows, creating "beauty" light, or to mimic a practical light in a scene. LitePad has been hailed as the perfect "get me out of trouble" light because little needs to be done when using LitePad in order to make it produce beautiful light.

Low Heat
Because LitePad is an LED light source, the amount of heat generated is very low. In the centre of the LitePad, the unit is cool to the touch. The edges, where the LED are located, is only slightly warm. This means that LitePads can be left on all day in a small set without making the room unbearable to work in.

Lightweight
Weighing significantly less than a convention light source, LitePads are capable of being mounted in many different ways and places. Whether it be Rosco's mounting brackets, Velcro, or even rubber bands, LitePad's low weight makes it incredibly easy to mount and makes carrying a few of them around a breeze.

Minimal Power Consumption
With each LED only consuming a quarter of a watt, LitePad is an extremely energy efficient light source. There is no longer the need for kilowatts of power or a generator to power a set full of lights. A few dozen LitePads can easily run off a single 13 amp socket.

Easy on the Eyes
Unlike many LED sources, LitePad is a bounced LED light - not an array of LEDs pointing directly forward. Performers or technicians can look directly into LitePad without squinting, hurting their eyes or getting a headache.

Brightness
LitePad HO+ offers the brightest LitePad to date. With LEDs on all four edges of all of the standard sizes, LitePad HO+ gives you the maximum output in the smallest of spaces.

Dimmable
LitePads are a fully dimmable LED product. Rosco's proprietary Single Fader Dimmer and 2 CH/DMX Dimmer can smoothly dim any standard size LitePad with no colour temperature change. With LitePad's dimmers, you are able to set the exact light intensity you need.

Interior Connector
LitePads new interior connector eliminates the traditional wire, which had the potential to be pulled out during use. This feature was introduced, based on user feedback of previous versions of LitePad. It makes the product more rugged and easier to use.

Daylight/Tungsten
LitePad is available in two colour temperatures, daylight (approx. 5800K) and tungsten (approx. 3600K). With tungsten and daylight LitePads, which have equal light output, there is no need to colour correct your LitePad, losing valuable light intensity. LitePad's minimum green content allows for high colour rendering and great film and digital photography.

LitePad HO+ Everywhere Lighting Kit includes

1 x	LitePad 3" Circle HO+ Daylight	1 x	3 Circle HO+ Tungsten	1 x	4-Pin Adapter Cable
1 x	LitePad 3 x 6 Daylight	1 x	3 x 6 HO+ Tungsten	1 x	Anton Bauer Adaptor Cable
1 x	LitePad 3 x 12 Daylight	1 x	3 x 12 HO+ Tungsten	2 x	3" Brackets
1 x	6 x 6 HO+ Daylight	1 x	6 x 6 HO+ Tungsten	1 x	6" Bracket
1 x	6 x 12 HO+ Daylight	1 x	6 x 12 HO+ Tungsten	2 x	12" Brackets
1 x	12 x 12 HO+ Daylight	1 x	12 x 12 HO+ Tungsten	3 x	1/4 - 20 Baby (5/8) Pins
6 x	3 amp Transformers	1 x	Car Adaptor	1 x	Single Fader Dimmer
6 x	Right Angle 10' Ext. Cables	6 x	Y Splitters	1 x	1560 Pelican Case
2 x	4-Way Splitters	1 x	AA Battery Holder	1 x	Cinegel Swatchbook

General Specifications

• Colour Temperature:
  Approximately 5800° and 3600° Kelvin
• Thickness:
  8mm
• Operating Temperature:
  -30° C - +85° C
• Lamp Life:
  60,000 hrs.
• Power:
  12v DC input
• Weight:
  16.3 kg
• Dimensions:
  558.8 x 457.2 x 260.4 mm