This is one of five optinial lenses, that when used with Christie's single-chip DLP® SXGA+ products, this lens has a fixed 1.2:1 throw ratio, or 1.30:1 when used with 720 HD projectors. If used with the DW30, the lens will provide a fixed 1.31:1 throw ratio. If used with the HD405, the lens will provide a fixed 1.1:1 throw ratio.
This is one of five optinial lenses, that when used with Christie's single-chip DLP® SXGA+ products, this lens has a fixed 1.2:1 throw ratio, or 1.30:1 when used with 720 HD projectors. If used with the DW30, the lens will provide a fixed 1.31:1 throw ratio. If used with the HD405, the lens will provide a fixed 1.1:1 throw ratio.
Please refer to the Christie throw distance lens calculator chart PDF located under the Overview tab of this lens option.
This PDF document contains a static table outlining each lens’s throw formulas, vertical and horizontal offset capabilities and attainable minimum and maximum screen sizes when used with the Christie projectors listed below. All measurements are presented in metric and imperial formats.
- Christie DS+60
- Christie DS+65
- Christie DS+650
- Christie DS+655
- Christie DW30
- Christie HD405
- Matrix 3000
Specifications
SXGA+ projectors
Vertical & Horizontal offset
V. = ±120% & H. = ±78%
Minium/maximum screen width
79cm - 1,208cm (31 inch - 476 inch)
Specifications
720 HD projectors
Vertical & Horizontal offset
V. = ±231% & H. = ±104%
Minium/maximum screen width
79cm - 1,208cm (31 inch - 476 inch)
Lens length
23.1 cm (9.1 inch)