The Odyssey Family of Codecs
Teradek’s Odyssey family are the world’s most advanced H.264 network video codecs. The Odyssey encoders are unique in their ability to encode virtually every video input, and any resolution in the world today. Odyssey’s 1080p60 HD capable video provides startling clarity and resolution, with extremely low network bandwidth requirements and low latency.
Variety of Models
In addition to the 1HDe3, there are three other models in the range:
•
1HDc: 1ch HD Codec : 1HDMI in, 1 HDMI out
•
1HDe5: 1ch HD Encoder : 5 wire component in RGB+HV
•
4SDe: 4ch SD Encoder : 4 composite SD in, 1 composite SD out
Industrial Strength and Mission Critical
Odyssey is rugged, with a wall mountable aluminium case with a small footprint, no moving parts, and an embedded operating system designed for mission critical reliability. Odyssey’s hardware compression provides the highest performance at lowest power consumption. In fact, the compete design is optimized for energy efficiency, allowing units to be deployed in harsh environments like airborne or remote locations. Odyssey can use either Power over Ethernet (PoE), or DC power, or both as redundant failover power sources to further increase reliability. Installation and operation are simple and intuitive.
Video
- Input: 1 Channel HD, up to 1080p60/50
- Connector: 3 BNC
- HD Monitor Output: 1 Channel 480p60/525p50
- Output Connector: BNC
Audio
- Channels: 1 Stereo or 2 Mono
- Connector: Terminal Block
- Audio Outputs: 3.5mm audio jack
Codec
- Compression Algorithm: High Profile H.264 (L4.1), MJPE
- Compression Rate: 30FPS down to 1FPS Per Stream
- Resolution: HD (1920 x 1080), Full D1, CIF
- Audio Compression: AAC, MP2
Network
- Ethernet: 10/100/1000 Base-T
- Ethernet Protocols: TCP/IP, UDP, HTTP, DHCP, NTP, RTP, RTSP, SSL
- Advanced built-in web server
- Feature-rich, advanced WebUI
- Bit Rate: 4 to 20 Mbps
