The FlexiScope Module Opt 03 allows the display of HD SDI and SD SDI video and audio signals on the MS9000, DS9000, FlexiScope and
MicroFlex series of Hamlet instruments.
The generator functions independently of the video and audio monitor with 16 available test signals, this allows closed loop testing to take place for your device under test.
The HD/SD serial input connection is made to the centre gold plated BNC socket, which is internally terminated at 75 ohms. The left BNC provides a video and audio SDI generator and the right BNC allows an external timing reference or AES audio signal to be input.
Simple to exchange modules in the FlexiScope, MicroFlex, MonitorScope 9000 and DigiScope 9000, just remove 2 screws and pull the module out of the main frame, insert new module tighten the 2 screws and you are now ready for a new set of inputs.
Features and Functions
- Input BNC
- Loop Out BNC
- Ext Ref. / AES input BNC
- Auto sensing of HD and SD formats
- Audio decode
Generator Features and Functions
- ̀16 test patterns: 100% Bars, 75% Bars, Split Bars, Bowtie, Sweep, Pluge, Multi, Pulse & Bar, Modulated Steps, White Screen, Red Screen, Convergence, Split equaliser/pll test pattern, Ramp, Limit Ramp
- ̀Individual enabling of Y and C components
- Embedded audio on any of the four groups
- User defined 64 character ident
- Selection of tone, silence or no audio packets.
Television standards supported by this module: including 1/1.001 standards
- ̀HD 60 is 1080/60/2:1
- HD 50 is 1080/50/2:1
- HD 48 is 1080/24/sf
- HD 30 is 1080/30/1:1
- HD 25 is 1080/25/1:1
- HD 24 is 1080/24/1:1
- 720 60 is 720/60/1:1
- 720 50 is 720/50/1:1
- SD 525 is 525
- SD 625 is 625
